RHEL5 환경에서 ISCSI 구성하기
네트워크 스토리지
FCoe
iSCSI
AoE
뭐가 이리도 많지? ^^
궁금하당~~~
2011.7.1 추가함
iSCSI on CentOS 5.5
CentOS 5.5 iSCSI target setup with TGT
http://bsmith9999.blogspot.com/2010/10/centos-55-iscsi-target-setup-with-tgt.html
Linux tgtadm: Setup iSCSI Target ( SAN )
http://www.cyberciti.biz/tips/howto-setup-linux-iscsi-target-sanwith-tgt.html
iSCSI = Internet SCSI
iSCSI는 TCP/IP 기술을 사용하여 SCSI 프로토콜을 전송하여
네트워크상의 다른 시스템에 탑재된 하드 디스크를 연결하기 위한 구조.
iSCSI target -> server
iSCSI initiator -> client
iSCSI initiator use CRC for data integrity
TGT = target framework
STGT = SCSI target framework
IQN = iSCSI Qualified Name
tgtadm – Linux SCSI Target Administration Utility
LUN = iSCSI Logical Unit
DM = device mapper
CHAP = User/Password authentication
Scsi-target-utils Quickstart Guide
https://fedoraproject.org/wiki/Scsi-target-utils_Quickstart_Guide
RHEL 5.5/CentOS 5.5 iSCSI Storage Server
http://rhev-wiki.org/index.php?title=RHEL_5.5/CentOS_5.5_iSCSI_Storage_Server
1. fdisk /dev/sdc
2. yum install scsi-target-utils
3. /etc/tgt/targets.conf
<target iqn.2001-04.com.example:export.disk1>
backing-store /dev/sdc1
</target>
4. chkconfig tgtd on && service tgtd start
5. tgtadm –lld iscsi –op show –mode target
————————————————-
Target 1: iqn.2001-04.com.example:export.disk1
System information:
Driver: iscsi
State: ready
I_T nexus information:
LUN information:
LUN: 0
Type: controller
SCSI ID: IET 00010000
SCSI SN: beaf10
Size: 0 MB
Online: Yes
Removable media: No
Backing store type: rdwr
Backing store path: None
LUN: 1
Type: disk
SCSI ID: IET 00010001
SCSI SN: beaf11
Size: 764710 MB
Online: Yes
Removable media: No
Backing store type: rdwr
Backing store path: /dev/sdc1
Account information:
ACL information:
ALL
————————————————-
Running an iSCSI SAN on CentOS 5
RHEL5 iSCSI Target/Initiator
http://blog.hamzahkhan.com/?p=55
iSCSI initiator로 Fedora 14의 Disk volume(iSCSI Target) 마운트
http://bryans.tistory.com/entry/iSCSI-initiator%EB%A1%9C-Fedora-14%EC%9D%98-Disk-volumeiSCSI-Target-%EB%A7%88%EC%9A%B4%ED%8A%B8
scsi-target-utils로 iscsi target 설정하기…
http://strawman.egloos.com/1929167
Configure iSCSI Target
http://www.server-world.info/en/note?os=Fedora_15&p=iscsi
Configure iSCSI Initiator
http://www.server-world.info/en/note?os=Fedora_15&p=iscsi&f=2
Configuring iSCSI Targets and Initiators on RHEL5
http://www.outsidaz.org/blog/2010/02/27/configuring-iscsi-targets-and-initiators-on-rhel5/
Installing Linux on a Multipath iSCSI LUN on an IP Network
http://publib.boulder.ibm.com/infocenter/lnxinfo/v3r0m0/index.jsp?topic=/liaai/multiisci/liaaimiscistart.htm
How Do I Setup an iSCSI Server in Redhat Enterprise Linux (RHEL) 6?
http://samcaldwell.net/index.php/technical-articles/3-how-to-articles/103-how-do-i-setup-an-iscsi-server-in-redhat-enterprise-linux-rhel-6
The iSCSI server is not CPU intensive, but it is (obviously) an I/O intensive server.
This means that a single quad-core CPU can easily be overkill,
but a slow disk controller or slow networking can kill the project before it reaches production.
it would have been a better plan to use smaller SFF disks to achieve higher performance over more disks.
the operating system was loaded on 2*160GB (RAID 1).
The iSCSI LUN exposed by the server existed on 4*1.5TB (RAID10).
Use two or more NICs per iSCSI server to access the storage network.
In most cases, a minimum of four NICs just for storage is appropriate.
Configure iSCSI in CentOS 4/5 REHL 4/5
http://linuxbites.wordpress.com/2010/03/26/configure-iscsi-in-centos-45-rehl-45/
Quick notes on using TGT as a iSCSI target on Linux
http://billscontinuinglife.com/2011/03/quick-notes-on-using-tgt-as-a-iscsi-target/
Install iscsi target:
yum install scsi-target-utils
Check to see if disks are available:
fdisk -l
Start and enable the daemon at boot time:
service tgtd start
create the target and define its name:
tgtadm –lld iscsi –op new –mode target –tid 1 -T iqn.2001-04.local.somecompany:storage.disk2
add a LUN to the target:
tgtadm –lld iscsi –op new –mode logicalunit –tid 1 –lun 1 -b /dev/sdb
Enable the target to accept any initiators:
tgtadm –lld iscsi –op bind –mode target –tid 1 -I ALL
Check to see status
tgtadm –lld iscsi –op show –mode target
iscsi + truecrypt 를 이용한 원격 보안 저장소 만들기 part.1
http://storymate.net/~wbstory/tc/wbstory/129
PC PitStop – Value leader in SATA & SCSI storage
http://www.pc-pitstop.com/
2010-08-15 CentOS 5.5(64bit)で試すiSCSI環境構築ガイド
http://d.hatena.ne.jp/yoshi-ken/20100815
오픈 소스로 만드는 공유 파일 시스템:코스트 비교
http://j2k.naver.com/j2k_frame.php/korean/bitstar.jp/blog/?p=1774
implementing High Availability (HA) fail over for server pools and guests in Oracle VM
http://download.oracle.com/docs/cd/E11081_01/doc/doc.21/e10898/ha.htm
NFS와 iSCSI의 성능차이
http://j2k.naver.com/j2k_frame.php/korean/d.hatena.ne.jp/bitwaka/20090507/1241676154
ServerA <– 100Mbps –> ServerB
약1GB의 파일을Write/Read
NFS,iSCSI,로컬HDD(SATA/7200회전)
time dd if=/dev/zero of=/mnt/iscsi-vol/testfile bs=128k count=8192
Write3번째
NFS : 6.6 MB/s
iSCSI : 36.0 MB/s
Local : 146 MB/s
Formatting an iSCSI mount as OCFS2
http://blog.travisz.com/2011/03/27/formatting-an-iscsi-mount-as-ocfs2/
Setting Up an Inexpensive iSCSI Linux Cluster Using SLES10 and OCFS2
http://www.oracle.com/technetwork/topics/linux/iscsi-linux-rac-cluster-sles10-094669.html
Linux, iSCSI 환경에서 Oracle RAC 10g Release 2 클러스터 설치하기
http://www.oracle.com/technetwork/kr/testcontent/hunter-rac10gr2-iscsi-092170-ko.html
Linux 에서 iSCSI 설치
http://lunatine.springnote.com/pages/6522583
2011.7.2 추가함
Setting Up an Inexpensive iSCSI Linux Cluster Using SLES10 and OCFS2
http://www.oracle.com/technetwork/topics/linux/iscsi-linux-rac-cluster-sles10-094669.html
iSCSI With OCFS2
http://gimparm.blogspot.com/2010/07/iscsi-with-ocfs2.html
Scalable Web Solutions – Use Case: Regulatory Reform In Vietnam On eZ Publish CMS
http://www.slideshare.net/gofina/scalable-web-solutions-use-case-regulatory-reform-in-vietnam-on-ez-publish-cms
SUSE Linux Enterprise Server 11 SP1 – Storage Administration Guide
http://www.novell.com/documentation/sles11/pdfdoc/stor_admin/stor_admin.pdf
Keep web servers in sync with DRBD and OCFS2
http://rackerhacker.com/2010/12/02/keep-web-servers-in-sync-with-drbd-and-ocfs2/
Clustered Filesystem with DRBD and OCFS2 on CentOS 5.5
http://wiki.virtastic.com/display/howto/Clustered+Filesystem+with+DRBD+and+OCFS2+on+CentOS+5.5