CentOS – AoE (vblade) 설정
1. AoE Target(서버) 만들기
– 다운받을 목록
http://aoetools.sourceforge.net/
vblade
– 압축풀기 & 설치
tar xvfz vblade-14.gz
cd vblade-14
make
– 링크걸기
ln -s `pwd`/vblade /usr/sbin/
– 서버 스토리지 설정
vblade 1 2 eth0 /dev/sdb1 ( 1 shelf 2 slotnumber )
– 자동시작및 상태유지를 위한설정
echo “e1:2345:respawn:/usr/sbin/vblade 1 2 eth0 /dev/sdb1” >> /etc/inittab
init q
ps -aef | grep vblade
2. AoE initiator (클라이언트) 설치하기
– 다운받을 목록
http://aoetools.sourceforge.net
aoetools
http://www.coraid.com –> Driver Updates –> Linux –> aoe6-51.tar.gz
aoe6-51.tar.gz
– 압축풀기 & 설치
tar xvfz aoe6-51.tar.gz
tar xvfz aoetools-18.tar.gz
cd aoe6-51
# make KDIR=/usr/src/kernels/2.6.9-55.0.2.EL-smp-i686 \\
INSTDIR=/lib/modules/2.6.9-55.0.2.ELsmp/kernel/drivers/block/
#make install
또는 make && make install
#modprobe aoe
cd aoetools-18
# make install
– 상태확인및 마운트하기
# mkdir mountpoint
# aoe-stat
e1.2 20.003GB eth0 up
mount /dev/etherd/e1.2 mountpoint/
df -h 확인해볼것
1 Response
… [Trackback]
[…] There you will find 45924 additional Information on that Topic: nblog.syszone.co.kr/archives/3020 […]